specification dc voltage minimum current rated current (continuous) peak current (10 min.) rated power (continuous) ripple & noise (max.) note.2 voltage tolerance output line regulation load regulation note.3 hold up time ac receptacle rated (max.) voltage range frequency range efficiency (typ.) input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note 4) working temp. working humidity storage temp., humidity temp. coefficient vibration dimension others note protection ac current 5v 12v 24v 1.5a 8a 8a 1a 8a 12a 0.5a 4.5a 5a 244w 80mvp-p 5.0% 150mvp-p 200mvp-p 1.0% 1.0% 5.0% 1.0% 5.0% 5.0% 5.0% 5.0% 12ms min. at full load 1a / 230vac 200 ~ 264vac 47 ~ 63hz 76% 4.5a / 230vac 80a / 230vac 3.5ma / 240vac cooling forced air ventilation by 8cm dc fan withstand voltage i/p-o/p :1.5kvac , i/p-fg isolation resistance i/p-o/p :50m ohms / 500vdc , i/p-fg / 25 / 70% rh -10 ~ +50 (refer to output load derating curve) 20 ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.05% / ( 0 ~ 50 10 ~ 200hz, 2g 10min./1cycle, 60min. each along x, y, z axes connector see page 2 150*140*86mm (l*w*h) 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. load regulation is measured from 20% to 100% max. load. 4. the power supply is considered as an independent unit, but the final equip ment still need to re-confirm that the whole system complies with the emc directives. 105 ~ 200% rated output power 105 ~ 140% rated output voltage 230vac input only built-in passive pfc, pf>0.7 economical video game power power on-off switch protections: short circuit / overload / over voltage / over temperature forced air cooling by built-in dc fan 100% full load burn-in test 2 years warranty features : compliance to en55022 class b emi conduction & radiation protection type : shut down o/p voltage, re-power on to recover protection type : shut down o/p voltage, re-power on to recover overload over voltage MWP-610P model no. channel ch1 ch2 ch3 design refer to en60950-1 304w triple output for video game m w p - 6 1 0 p power factor (typ.) pf>0.7 / 230vac compliance to en61000-4-2,3,4,5,6,8,11, l criteria a ight industry level, ems immunity compliance to en61000-3-2,-3 harmonic current over temperature protection type : shut down o/p voltage, recovers automatically afte r temperature goes down peak power (10 min.) 304w file name: MWP-610P-spec 2010-04-28
mechanical specification file name: MWP-610P-spec 2010-04-28 unit: mm pin no. pin no. pin no. 1 5 9 3 7 11 2 6 10 4 8 12 assignment assignment assignment +12v +12v +12v +24v +24v gnd gnd gnd gnd +5v +5v +5v 140 86 80 42.55 16 29.5 25 138 6 52.4 118.5 120 150 69.9 61.8 output wires pin1 350 50 pin9 pin4 pin12 static characteristics derating curve ambient temperature ( ) input voltage (vac) 60hz 200 210 220 230 240 264 load (%) load (%) 20 40 60 80 100 -10 0 10 20 30 35 40 50 60 (horizontal) 90 100 80 70 60 50 40 ta=25 304w triple output for video game m w p - 6 1 0 p pin no. assignment :jst elr-12v or equivalent
|
